TOP TAG : cigarette wind charging shiitake lamp Aluminiumcan pencil Orchid Bowtie crane sail Plate dumpling honey rice toy panel overlord pack paper-cut pistol Dye Yellowpage extinguisher MP3 Jean cherry snail popcan backpack

 

 

DIY Home
Position : HOME>DIY Tutorial>DIY Home>

DIY torch with waste beer bottle

Source: Author: Time:2011-05-24

step:



First, the copper top plate to the wall with screws (if the cement wall, it might need screws after drilling with expansion). Then, with bolts and nuts will be fixed as shown in split ring.



Now make the wick. Coupling through the copper to cotton, and then use the raw material coupled with one end of the copper winding laps, wrapped tight, and then into the bottle, wick to make a~



Finally, the torch will be installed on the bottle and secure the bracket to the ~, of course everything is ok, the bottle had to have fuel for the job may be considered lighter oil. Also, remember that we also bought a copper cap you, usually, set the wick on the copper cap, so that the fuel volatilization ~

Pre-topic:DIY wallet with one zipper
Next-topic:none
Home  |  About us  |  Contact us  |  Sitemap  |  RSS
Copyright 2007 - 2010 LetusDIY.ORG -------