TOP TAG : stereogram brass desk apple plane holder control foil herbal Lucky alpenstock chassis cardboard reflector table Gift milktea iron Cooker tassel brick nano phototelescope stopper NAROTO Corrugated coat coin Fabricart dart

 

 

DIY Toy
Position : HOME>DIY Tutorial>DIY Toy>

DIY ring by steel tube

Source: Author: Time:2013-05-27
A friend asked me to make a ring by steel tube, well, one to do!

1, stainless steel tube to a predetermined inner diameter of the milling
2, the cutting periphery to a predetermined diameter, top further milled black rosewood ring mounting position
3, after puncturing bolted timber, placed on a rotary table peripheral cutting
4, the inner reaming


5, slight trimming
6, with a cup ... too closely with the size, wooden ring was cracked brace
7, repeat the previous steps, were installed at both ends bonded black rosewood timber
8, the top of the outer timber and the inner stainless steel trim to flush


Pre-topic:DIY toy bear by Iron wire
Next-topic:none
Home  |  About us  |  Contact us  |  Sitemap  |  RSS
Copyright 2007 - 2010 LetusDIY.ORG -------